Alfa Network AIP-W505 User Manual page 4

EC C D
ONFORMANCE ECLARATION
Marking by the above symbol indicates compliance with the Essential
Requirements of the R&TTE Directive of the European Union (1999/5/EC).
This equipment meets the following conformance standards:
EN 60950-1: 2006 (IEC 60950-1) — Product Safety
◆
EN 55022:2006 + A1:2007, Class B — ITE EMC
◆
◆ EN 55024:1998 + A1:2001 + A2:2003 — ITE EMC
EN 300 328 V1.7.1 (2006-10) — Technical requirements for 2.4 GHz
◆
radio equipment
EN 301 489-1 V1.8.1 (2008-04) — EMC requirements for radio
◆
equipment
◆ EN 301 489-17 V1.3.2 (2008-04) — EMC requirements for radio
equipment
◆ 50385 (2002) — Country-specific SAR requirements
This device is intended for use in the following European Community and
EFTA countries:
◆ ◆
Austria Belgium
◆ ◆
Denmark Estonia
◆ ◆
Greece Hungary
◆ ◆
Latvia Lithuania
◆ ◆
Norway Poland
◆ ◆
Slovenia Spain
The user must use the configuration utility provided with this
N :
OTE
product to ensure the channels of operation are in conformance with the
spectrum usage rules for European Community countries as described
below.
This device will automatically limit the allowable channels determined
◆
by the current country of operation. Incorrectly entering the country of
operation may result in illegal operation and may cause harmful
interference to other systems. The user is obligated to ensure the
device is operating according to the channel limitations, indoor/outdoor
restrictions and license requirements for each European Community
country as described in this document.
– 4 –
◆ ◆
Bulgaria Cyprus
◆ ◆
Finland France
◆ ◆
Iceland Ireland
◆ ◆
Luxembourg Malta
◆ ◆
Portugal Romania
◆ ◆
Sweden Switzerland
C
OMPLIANCES
◆
Czech Republic
◆
Germany
◆
Italy
◆
Netherlands
◆
Slovakia
◆
United Kingdom