3
S
R
YSTEM
EQUIREMENTS
I
NSTALLING THE
The 11n Router has two basic operating modes that can be set through the
web-based management interface. For information on setting the mode
suitable for your network environment.
Configuration" on page
Router Mode — A gateway mode that connects a wired LAN and
◆
wireless clients to an Internet access device, such as a cable or DSL
modem. This is the factory set default mode.
Bridge Mode — An access point mode that extends a wired LAN to
◆
wirelessclients.
In addition to these basic operating modes, the wireless interface supports
Wireless Distribution System (WDS) links to other 11n Routers, and a
Wireless Internet Service Provider (WISP) Mode for a link to another
wireless network. These advanced configurations are not described in this
section.
See "Network Planning" on page 23
In a basic configuration, how the 11n Router is connected depends on the
operating mode. The sections in this chapter describe connections for basic
Router Mode and Bridge Mode operation.
You must meet the following minimum requirements:
An Internet access device (DSL or Cable modem) with an Ethernet port
◆
connection.
An up-to-date web browser: Internet Explorer 6.0 or above or Mozilla
◆
Firefox 2.0 or above.
– 27 –
11n R
OUTER
See "Operation Mode
48.
for more information.