Figure 8-17: Output Port Tab
Select an Output Port; each output port number has a relative camera
5.
number.
Tick off " Enable/Disable" the icon with a tick is " Enable"
6.
Tick off to
"Enable/Disable"
Figure 8-18: Output Port Field
Select the "Delay Trigger", with the unit of seconds, the delay time may
7.
be set from 0 to 999 seconds.
Under the " Active Duration" there are 0 to 999 seconds to choose. The
8.
setting of 0 second means permanent triggering.
Then click "Add"
9.
the selections made.
Click "Apply"
10.
Note!
An external standard 56K modem is required to transmit
alarm pager trigger, Alarm voice trigger or fax trigger
functions.
, the window below will show "Output Port" with
, and "OK"
71
The Delay Trigger
The Active Duration