Ness Pro series User Manual page 69

Alarm Voice Triggering
Optional external 56K modem required COM Port 1
Alarm Voice provides a preprogrammed voice message upon alarm trigger to a
mobile or landline phone through the modem connection.
Follow the instructions below to set Alarm Voice.
Click the Alarm Tab to select the "Camera"
1.
Select a " Trigger Period" (see Figure 8-7)
2.
Click the " Voice" Tab any type in the " Telephone Number"
3.
"Delay" seconds means how many seconds you'd like to delay before the
4.
Alarm Voice is sent, and 1 to 10 seconds may be sent (see picture below).
"Repeat Times" is used to set the times you'd like to trigger the alarm, and
5.
1 to 10 times can be set (see picture below)
Figure 8-15: Voice Tab
Then click "Add"
6.
selections made.
Click "Apply"
7.
Alarm Fax Triggering
Alarm Fax will fax a warning message and pictures on alarm trigger. Follow these
instructions to set Alarm Fax:
Click the Alarm Tab
1.
Select the "Camera" (see Figure 8-6)
2.
Select a " Trigger Period" (see Figure 8-7)
3.
Click the "Fax" Tab
4.
, the window below will show "Voice" with the
, and "OK"
-----------
Modem required.
69