Alarm Record Triggering provides event triggered video evidence and normally
reacts with accelerated frame rate recording; therefore it is important the correct
FPS is set to achieve the desired frame rate for capture. The following shows
how to use Record Alarm:
Click the Alarm Tab
1.
From "General" select the "Duration" for motion detection triggering and
2.
click the checkbox next to "Motion Rec." (See Figure 8-5) to select the
frame speed for motion detection.
Figure 8-5: General Field
Select the Camera to configure.
3.
Figure 8-6: Camera Settings
Select the first " Enable" field for 24-hour recording reaction or select the
4.
Trigger Period " Enable " field for record duration only and set the record
duration period for reaction.
Figure 8-7: Trigger Period
Click "Add"
5.
Click "Apply"
6.
, then "OK"
to activate.
64