Table of Contents
Advertisement
Figure 6-3: Authority Selection Field
7.
The "Access Permissions" must be selected following the creation of each "Normal" user.
8.
Click the checkbox next to "Local" to give the user local access to the DVR host. (Local
access means users are able to access the DVR directly.)
9.
Click the checkbox next to "Remote" to give the user remote access. (Remote access
means users are able to access the DVR over the local LAN or Internet.) Select which
cameras you would like the user to access by clicking the checkbox next to the camera
number.
10.
Select "Password can be set from remote" to enable users to change their username and
password through a browser over the LAN or Internet.
11.
Select "Allow config from remote" to enable users to change their system configuration
through a browser over the LAN or Internet.
12.
Click "Allow Playback" to enable users to playback the recording files.
13.
Click "Allow Control PTZ" to enable users to control PTZ cameras.
14.
Select a checkbox to mark a given camera as available to the user being created or
modified. This function is primarily utilized to restrict a given user's ability to monitor
specific areas.
15.
Then click the "Add"
selected authority.
Figure 6-4 Local, Remote and Accessible camera Selection
To Modify User Settings
1.
Select the user.
2.
Make the changes in the Main Account Panel
button. The DVR will be add the user to the list with the
50
Advertisement
Table of Contents
