Ness Pro series User Manual page 11

Creating a disk array
To create an array, first select the drives to be included by navigating the cursor
over each drive and pressing Enter (see Figure C). An asterisk in the left most
column indicates the drive is selected. You may include from two to eight drives
in the array by selecting drives from the Available Drives section. To include
drives that are part of an existing disk array you must first delete the array
.
Figure C. Selecting Drives for a Mirrored Array
Navigate to the Create Array button after selecting all the drives for the array. Hit
Enter to bring up the Create Disk Array display (see Figure D and Figure E for
examples). Check that the proper drives are listed.
11