Firmware Upgrades; Web Ui Basic Operation; Live Video - D-Link DNR-2060-08P User Manual

6 bay network video recorder

Hide thumbs Also See for DNR-2060-08P:

Table of Contents

Section 5: Remote Operation

Firmware Upgrades

If a new version of the Web UI firmware is available on the NVR, the user will be prompted

while accessing the unit. Click Yes to accept the upgrade and follow the on screen instructions.

Start Internet Explorer again and enter the IP address of the NVR in the Address bar of the

browser; or if the unit address is set as a Favorite site, click the Favorites entry for the unit.

When the software is completely downloaded and installed, the Login Screen will be displayed.

When a NVR is successfully connected, the main window of the Web UI will be displayed.

Please reference "Basic Operation" on page 20 for an overview of the features available.

Functions specific to the Web UI will be described in the following sections.

View live video from the cameras attached to the NVR by clicking the Live button on the

main window toolbar. Choose a desired display mode – full-screen, 4-windows, 9-windows,

16-windows, and 20-windows – after the live images of the NVR are displayed on the main

window. When a dome camera is connected and viewed in single channel full-screen mode,

the dome camera control operation can be accessed. To choose desired display mode and to

operate dome camera control,refer to the following sections.

D-Link DNR-2060-08P User Manual

Table of Contents