Justconnect 16-channel poe network video recorder (41 pages)
Summary of Contents for D-Link DNR-F4432-16P
Page 1
Getting Started Guide for D-Link Network Video Recorder (NVR) PRODUCT QUICK INSTALLATION GUIDE DNR-F4432-16P 32CH 4HDD NVR with 16Ch PoE...
Page 2
STEP 1. Remove screws to open the Network Video Recorder housing and install up to four SATA HDDs. Connect the SATA cables to the HDDs. QUICK INSTALLATION GUIDE | DNR-F4432-16P...
Page 3
NOTE: If you need to connect more than 16 Cameras please connect them to a PoE switch on your LAN. Connect your monitor to either VGA or HDMI port. ear Panel Power on the NVR. VGA/HDMI QUICK INSTALLATION GUIDE | DNR-F4432-16P...
Page 4
Wait for on-screen Setup Wizard. Assign password to your Network Video Recorder. Type in the channel (camera) password. Camera’s default password is “admin”. Continue the setup following the on-screen instructions. Enter a new password: Enter channel password: QUICK INSTALLATION GUIDE | DNR-F4432-16P...
Page 5
Successfully added cameras will be shown with a green dot. You can also add cameras manually by selecting them and pressing the “Add” button. Camera 1 Camera 2 Camera 3 Camera 4 QUICK INSTALLATION GUIDE | DNR-F4432-16P...
Page 6
STEP 5. Install the D-Link CCTV app on your phone and scan the QR code to add your NVR. You can also find your NVR’s unique QR code under Network > P2P. D-Link CCTV Download the free on your smartphone or tablet Add “P2P Device”...