Dome Control - D-Link DNR-2060-08P User Manual

6 bay network video recorder

Hide thumbs Also See for DNR-2060-08P:

Table of Contents

Section 3: Front Panel Operation

The NVR allows users to control a dome camera via the function keys on the front panel. In Live mode, users can press a CHANNEL key to display

the desired dome camera in full-screen. To enter Dome Control mode, press the DOME key and a dome control panel will be displayed. To exit the

Dome Control mode and return to Live mode, press ESC or DOME.

The Dome Control Panel buttons are listed below.

Iris Close:

Iris Open:

Focus Far:

Focus Near:

Zoom Out:

Zoom In:

Preset:

Pan/Tilt Speed:

D-Link DNR-2060-08P User Manual

Dome Control

Adjust the camera's iris to a more closed position.

Adjust the camera's iris to a more open position.

Adjust the camera's focal point to a more distant point.

Adjust the camera's focal point to a nearer point.

Zoom out the lens of selected dome camera. This function

enables users to shrink the current image and a larger

viewing area can be displayed.

Zoom in the lens of selected dome camera. This function

enables users to enlarge a certain area.

This key is used to enter the Dome Preset menu to setup a

certain position as a preset and go to the predetermined

preset positions for viewing.

Live:

Click on it to exit Dome Control mode and return to live

full-screen viewing mode.

Users can select preferred pan/tilt speed.

Table of Contents