Log In/Log Off - D-Link DNR-2060-08P User Manual

Section 5: Remote Operation

Log in/Log off

Log in using the same account details previously setup in "User Management" on page 36.
One preset account admin and up to four other accounts can access a NVR at the same time.
Note: if the admin account is currently accessing the NVR's OSD setup menu via front panel
of the NVR, then the admin account at the remote monitoring site cannot change the settings
at the same time. The admin account at the NVR side has priority.
The following steps demonstrate procedures to connect and login to the NVR.
Start the remote monitoring software by entering the IP Address of the NVR in the Address
bar of the browser.Alternatively, click on the Favorite entry for the unit (if the IP address of the
unit has been set).
Enter the Username and password. The login username and password can be saved to ease
future logins. The default username and password is admin/1234.
Click OK to log in to the NVR. The process may take a few seconds.
When the connection is made successfully, the main window will display live video of the
attached cameras. When the web browser is closed, the remote system is logged out and
disconnected from the NVR at the same time.
D-Link DNR-2060-08P User Manual 83