Repair On Power Loss - D-Link DNR-2060-08P User Manual

Section 4: Advanced Configuration
If the NVR finds a file system error while recording, the NVR will reboot and an HDD auto scan will be initiated. If the auto scan fails, the HDD will
need to be formatted.
Note: If you wish to initiate HDD auto scan function following an abnormal power loss, enter the OSD setup menu via an authorized account and
access Database to set Repair On Power Loss to On. An HDD auto scan will be initiated every time the NVR powers on following a power loss or
if there is file system error.
The following options are available for the auto scan process.
Skip Auto Scan:
Time Expired:
Format HDD:
Recover NG HDD:
D-Link DNR-2060-08P User Manual

Repair on Power Loss

During the scanning process,users can press any key to skip the process.
If the scanning exceeds a predetermined period of time (3hrs for 1TB HDD, 6hrs for 2TB HDD, etc), the scanning
process is treated as failed and is automatically terminated. The NVR will reboot.
If the scanning process has failed, users will be prompted to confirm a format of the HDD marking the bad
sectors. After confirmation, login of an authorized account is required if password protection is enabled. If users
select cancel or do not respond within 5 minutes, the HDD with the error will be marked as a NG HDD. A NG
HDD will not be counted as a part of the NVR's database and will sit idle.
Enter the OSD setup menu via an authorized account and access Database. Then select Internal Disks and
find the NG HDD from the list. Under Action column, select Format to format the NG HDD. Then select Add
to add the formatted HDD to the database.
68