Setting up the system
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital demodulator
(DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 or VIDEO 3 jacks. (See "Connecting video components".)
12
EN
COAXIAL
OPTICAL
OPTICAL
CD/DVD
VIDEO 3
VIDEO
2
DVD/
6CH
DIGITAL IN
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
OPTICAL
MONITOR
Optical
fiber cable
DIGITAL OUT
Optical fiber cable
Optical fiber cable
OPTICAL DIGITAL IN (AUDIO)
CD or DVD player
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
OPTICAL DIGITAL OUT
Connect the video signal and digital
audio signals to the VIDEO 3 jacks.
(See "Connecting video components".)
OPTICAL DIGITAL OUT (AUDIO)
CD or DVD player
COAXIAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
LD player
8
!
!