Kenwood VR-716A Connecting Video Component Manual

Thank you for purchasing this product. This Receiver you just purchased has been upgraded with new features.
HD (High Definition) Component Video Switching
Video sources with component video outputs (such as DVD players and HDTV tuners) can be connected and
switched to an HD-capable TV or monitor, producing significantly improved video images over conventional NTSC
video.
Upgraded Specifications
VIDEO section
COMPONENT VIDEO inputs /outputs
COMPONENT VIDEO (luminance signal) .............. 1 Vp-p / 75 Ω
COMPONENT VIDEO (CB/CR-signal) ............ ±0.32 Vp-p / 75 Ω
Connecting video components (COMPONENT VIDEO)
If you have connected the receiver to a video component with COMPONENT jacks, you can get a better picture quality than
by connecting to the S-VIDEO jacks.
Note: When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks.
The VR-716A receiver isidentical to the VR-716 except for the features described in this addendum. For all other information
and specifications, please refer to the VR-716 Instruction Manual.
AUDIO VIDEO SURROUND RECEIVER
VR-716A
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5418-00 00 MA (K, P) KW 0305
+ +
- -
COMPONENT VIDEO
VIDEO 2 IN
CB CR CB
Y Y
DVD IN MONITOR OUT
CR OUT
CB OUT
Y OUT
CR OUT
CB OUT
Y OUT
CR
CR IN
CB IN
Y IN