Basic Remote Control Operations For Other Components; Registering Setup Codes For Other Components; Searching For Your Code - Kenwood VR-7070 Instruction Manual

Basic remote control operations for other components

The remote control supplied with this receiver is also capable
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate.The
remote control is designed to retain setup codes in memory while
you change batteries.

Registering setup codes for other components

LCD
SRC Power
1
Find the setup code of the component to be registered.
• Refer to the setup code lists to find the setup code for the
component to be registered.
Example: To register a DVD made by KENWOOD, you would enter
"0534".
Input Component
(DVD) DVD player KENWOOD
Source key
TUNER
DVD/6CH
CD/DVD
MD/Tape
VID1 / AV AUX
VID2
VID3
PHONO
TV
2
Press the source keys (DVD/6CH, CD/DVD, VID1, VID2, VID3,
TV, MD/TAPE, AV AUX, PHONO).
• PHONO key has to re-assigned to another key before a setup code
can be registered.
• While in Tuner mode, setup code function will not be available.
3
Press and hold the Learn key until the
release the Learn key.
38
EN
Source
keys
Numeric keys
Learn
Maker Code
0534 DVD
Other components
Receiver (Kenwood)
DVD (other manufacturers')
CD and MD (Kenwood)
Cassette deck (Kenwood)
VCR and PVR (other manufacturers')
Cable and DTV decoder (other
manufacturers')
DSS (other manufacturers')
Additional key for re-assigning
TV/VCR combo, TV/DVD combo, TV
(other manufacturers')
blinks twice, then
4
Press the numeric key to enter the four-digit code for the
component to be registered.
• If performed correctly, the
• Point the remote control at the component and press SRC Power
key once. It should turn on/off but if it does not, repeat step 2 to 4
• If the component still does not work, try searching for the code.
5
Repeat steps 2 to 4 to register additional components until
all components have been registered.
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
Searching for your codes
If your component does not respond after trying all the codes listed for
your component, or if your component is not listed at all, try searching
for your code.
For example, to search for code for your TV:
1
Press the TV key once. Next, press and hold the Learn key
until the
2
Press the numeric key to enter "9 - 9 - 1".
•
will blink twice.
3
fi
Point the remote control at the TV and slowly alternate
between pressing the SRC Power and TV key.
•
Stop when the TV turns on or off.
•
Key
In the search mode, the remote control will send IR codes from its
library to the selected device, starting with the most popular code
first.
4
Press the Learn key once to lock in the code.
5
To search for the codes of your other components, repeat
steps 1 through 4 , but substitute the appropriate key (i.e.,
DVD/6CH, CD/DVD, VID1, VID2, VID3, TV, MD/TAPE, AV AUX,
PHONO).
•
PHONO key has to be re-assigned to another key before a setup
code can be programmed.
7
·
will blink twice.
blinks twice, then release the Learn key.