Dmx Traits - ADJ Quad Phase HP User Instructions

Quad Phase HP
Channel Value
1
0 - 16
17 - 33
34 - 50
51 - 67
68 - 84
85 - 101
102 - 118
119 - 135
136 - 152
153 - 169
170 - 186
187 - 203
204 - 220
221 - 237
238 - 255
2
0 - 9
10 - 120
121 - 134
135 - 245
246 - 249
250 - 255
3
0
1 - 255
4
0 - 15
16 - 255
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 14

DMX Traits

Function
COLOR SELECTION
COLOR 1
COLOR 2
COLOR 3
COLOR 4
COLOR 5
COLOR 6
COLOR 7
COLOR 8
COLOR 9
COLOR 10
COLOR 11
COLOR 12
COLOR 13
COLOR 14
COLOR 15
ROTATION
NO ROTATION
CLOCKWISE FAST - SLOW
NO ROTATION
COUNTER-CLOCKWISE
SLOW - FAST
NO ROTATION
SOUND ACTIVE
STROBING
OFF
STROBING SLOW - FAST
SHUTTER OPEN
OFF
OPEN
Quad Phase HP
The UC-IR infrared remote has many differnet functions and gives
you complete control of your Quad Phase HP. To control the your
desired fixture you must aim the controller at the front of the fixture
and be no more the 30 feet away.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - Hold this button down to fully light up the unit. When you
let the button go, the unit will return to its previous state.
COLOR - Press this button to enter Dimmer mode. Use the 1-9 but-
tons to select your desired color. Adjust the output intensity using the
"DIMMER +" and "DIMMER -" buttons.
STROBE - This button will activate the strobe effect. You can control
the flash rate by pressing the "DIMMER +" and "DIMMER -" buttons.
If you press and hold this button the unit will begin to strobe.
SOUND ON & OFF - These buttons activate and deactivate the
sound active mode.
SHOW - This designates the fixture as a slave fixture in a master/
slave configuration.
"DIMMER +" and "DIMMER -" - Use these buttons to adjust the out-
put intensity and to adjust the strobe speed.
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 15
UC-IR Operation