ADJ Quad Phase HP User Instructions page 5

Quad Phase HP System Menu Quad Phase HP System Menu
ADDR -
DMX Address Setting.
1. Press the either the MENU, UP, or DOWN buttons until
"ADDR" is displayed, press ENTER.
2. "1" will now be displayed and flashing. Press the UP or
DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the either the MENU button until "SLnd" is displayed,
press ENTER. "MAST", "SL 1" or "SL 2" will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim and exit.
SOUN -
Sound Active mode.
1. Press the MENU button until "SOUN" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to activate sound active mode,
or "OFF" to deactivate sound active mode.
3. Press ENTER to confirm.
SENS
- Using this mode, you can set the sound sensitiv-
ity level. 0 for least sensitive, 100 for more sensitive.
1. Press the MENU button until "SENS" is displayed, press ENTER.
2. Using the UP or DOWN buttons adjust the sensivity level to your
desire.
3. When you found your desired level, press the ENTER, and then press
and hold the MENU button for at least 3 seconds to confirm.
ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Quad Phase HP Instruction Manual Page 9