Kenwood SJM100 series User Manual page 2

the outside and powerbase Some regions of the country have
G
Wipe with a damp cloth, then dry. chalky water. This makes boiled
G
Do not use abrasives - they will water look cloudy and leaves a
scratch the metal and plastic deposit on the side of the kettle.
surfaces. This is normal but can be removed
with regular cleaning.
the inside
Alternatively, to reduce limescale
G
Even though your kettle comes
G
build up, use filtered water to fill
with a filter, you still need to clean
your kettle.
the inside (and the filter) regularly.
service and customer
Lift the out using the
G
care
central divider .
G Wash in warm soapy water, dry
If the cord is damaged it must, for
G
and refit by clipping back into
safety reasons, be replaced by
position.
KENWOOD or an authorised
the filter
KENWOOD repairer.
1 Open the lid.
UK
2 Slide the filter out .
If you need help with:
3 either rinse under the tap or use
G using your kettle
a soft brush.
G servicing or repairs (in or out of
or when descaling your kettle,
guarantee)
drop the filter in too. Rinse
call Kenwood Customer Care on
thoroughly.
023 9239 2333. Have your
4 Slide the filter back in to refit.
model number ready - it is
descaling
located on the underside of your
G Regular descaling of the flat
kettle and powerbase.
element will improve the
spares and attachments
G
performance of your kettle. If the
call 0870 2413653.
kettle is not descaled regularly the
other countries
build up of limescale may result in
G Contact the shop where you
the following:
bought your kettle.
problems may be experienced
G
with the kettle switching on and
G Designed and engineered by
off during use or switching off
Kenwood in the UK.
before boiling.
Made in China.
G
G the kettle may take longer to
boil.
guarantee (UK only)
the flat element may be
G
If your kettle goes wrong within
damaged.
one year from the date you bought
it, we will repair or replace it free of
Please note: Failure to descale your
charge provided:
kettle may invalidate your guarantee.
G you have not misused, neglected
When limescale starts to build up
G
or damaged it;
on the heating element, buy a
G it has not been modified (unless by
suitable descaler and descale your
Kenwood);
kettle. After descaling, boil with
it is not second-hand;
G
fresh water several times and
G it has not been used commercially;
discard. Clean any descaler off the
you have not fitted a plug
G
kettle - it can damage the parts.
incorrectly; and
you supply your receipt to children and burns or
G
show when you bought it.
scalds
This guarantee does not affect your
advice from the British Burn
statutory rights.
Association
Every year, 30,000 children go to
hospital with burns. What might be
a minor burn for an adult could
horrifically injure - or even kill - a
child.
take these precautions
G Keep hot drinks out of children's
IMPORTANT INFORMATION FOR
reach.
CORRECT DISPOSAL OF THE
Don't drink while holding your baby.
G
PRODUCT IN ACCORDANCE
If you're passing someone a drink,
WITH EC DIRECTIVE
make sure a child isn't underneath.
2002/96/EC.
G Keep your kettle, and its cord, well
At the end of its working life, the
back from the worktop edge so that
product must not be disposed of as
children can't grab them.
urban waste.
G Keep children away from the
It must be taken to a special local
kitchen work area.
authority differentiated waste collection
For baby's bath, run the cold water
G
centre or to a dealer providing this
first, then add the hot. Mix well and
service.
test the temperature with your
Disposing of a household appliance
elbow before you put baby in.
separately avoids possible negative
G Teach children about hot things.
consequences for the environment
and health deriving from inappropriate run cold water over a burn
disposal and enables the constituent
immediately, then get
materials to be recovered to obtain medical help. Don't stop to
significant savings in energy and remove clothing.
resources. As a reminder of the need
to dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
Designed and engineered by Kenwood in the UK
Made in China
19590/1
SJM100 series