Page 4
Your SJM610 kettle has been designed with a Variable before plugging in Temperature and Keep Warm feature to help select the Make sure your electricity supply is the same as the correct temperature to prepare the best tea -whatever one shown on the underside of your kettle.
Page 5
to use your kettle Variable Temperature Feature 1 The temperature can be set 1 Fill the kettle through either the spout or lid. To open the between 70, 75, 80, 85, 90, 95 lid, press the lid release button . The water level must or 100°C so that the most be between ‘MAX’...
Page 6
Keep Warm Function 1 Press the ON/OFF button once and the button will light up and 100°C will be shown on the display screen. 2 Select the required Keep Warm temperature between 70 – 95°C and then press the Keep Warm button. 3 Once the water has reached the desired temperature, the Keep Warm function will automatically switch on to maintain the water at the required temperature.
Wipe with a damp cloth, then dry. Do not use abrasives servicing or repairs (in or out of guarantee) - they will scratch the metal and plastic surfaces. call Kenwood Customer Care on 023 9239 2333. the inside Have your model number ready - it is located on Even though your kettle comes with a filter, you still the underside of your kettle and powerbase.
Page 8
(unless by Kenwood); it is not second-hand; it has not been used commercially; you have not fitted a plug incorrectly; and you supply your receipt to show when you bought it.
troubleshooting guide Problem Cause Solution Kettle not operating. No Power. Check kettle is plugged in. Kettle unplugged. Check kettle is correctly located to the powerbase. Display screen blank/Selected Kettle unplugged. Press the ON/OFF button to temperature not shown on display switch the kettle back on.