Adaptive Forwarding Mode
Purpose
Changing the time to
measure errors
4
Click the default forwarding mode you want.
5
Click
.
OK
You can:
Change the Sample Time
Define the minimum and maximum errors before changing adap-
tive forwarding mode
While CRC errors and runts are the most likely parameters
Note
to cause the switching mode to change, they are not the only
ones.
The sample time should be the shortest time needed to detect errors.
If the sample time is too great, there may be too many errors before
the forwarding mode changes. To change the time the switch retains
error counters:
Select
1
Configuration>Device Setup
Click
2
Switching
3
Click
.
Advanced
Click
4
Sample Time
5
Type the required number of seconds.
6
Click
.
OK
Standard Configuration
Changing the Setup of the Switch
.
.
.
39