Lateral Support - Invacare Spectra Plus Technical Manual

Spectra Plus Tech Manual

LATERAL SUPPORT

Fitting Instructions
THE LATERAL SUPPORTS CAN ONLY BE FITTED TO THE FIRM UPHOLSTERED BACKREST ASSEMBLY
(VISCOUNT SEATING).
To attach the lateral supports to the back of the backrest assembly follow these instructions.
Remove the existing pan-head screws from the top of each flange shown in Fig 1 Marked (A). The lower
screws of each flange remain in place.
Fig.1
With the longer screws provided
attached the support rail to the
backrest through the flanges into
the screw inserts Do not screw
securely, but do not overtighten as
this may damage the screw threaded inserts
With the support rails secured, slide the
lateral support into the support rail from the
bottom. Adjust to occupant's requirements and
firmly tighten the hand wheel (B).
19/01/2004
Fig.2
Line up the
support rail with
the holes in the
backrest as shown
In Fig.2
Section
Page 25 of 78