Care And Maintenance Vinyl Upholstery - Invacare Spectra Plus Technical Manual

Section Spectra Plus Tech Manual
VINYL UPHOLSTERY
Care And Maintenance Of Vinyl Upholstery.
This is the approved recommended care supplied by the material manufacturers.
To maintain the appearance of PVC coated fabrics, they should be cleaned regularly to remove fatty substances
in soiling which may reduce their serviceable life. A soft cloth and soapy water should be used to clean the
surface of the material. Mild soap of soap flakes are recommended and residual soap removed using cold water.
The surface should then be dried with a clean soft cloth. If the dirt is ingrained, the surface can be lightly
scrubbed with a soft brush.
Solvent cleaners, wax polish, strong detergents and patent chemical cleaners should not be used. The use of
these substance is likely to be harmful to PVC coated fabrics and repeated use can result in the removal of the
plasticiser from the PVC coating which will result in hardening and subsequent cracking of the material's
surface. The result of these conditions cannot be covered under the standard terms and conditions of the
warranty agreement.
PVC coated fabrics are resistant to most mild acids, and household stains. Some substances such as ball-point
pen ink, lipstick, newsprint and food colouring may be absorbed by the vinyl and cause permanent staining. This
can be minimised by immediate cleaning with a damp, soapy cloth or sponge.
Ultra-violet light can also reduce the life of upholstery coating material. This is a normal ageing process and
cannot be covered under the standard terms and contidions of the warranty agreement. Necessary precautions
should be taken to guard against periods of long term exposure to ultra-violet light.
During scheduled service and maintenance checks, inspect the condition of the upholstery edging to ensure
that, due to impact damage etc. no sharp edges or staples are protruding which may cause injury.
Page 24 of 78 19/01/2004