Table of Contents
Advertisement
3.6 REMOVING THE ELITE E2S/E2D BACK
Removing/Disengaging the Elite E2S/E2D Back: (see Fig. 13; Fig. 14)
1.
To disengage the upper mounting pins, simultaneously lift upward (1) on both
latch mechanisms (A), then pull/push forward (2) on the top of the back
support to release the upper mounting pins (C1) from the mounting plates (B).
2.
Remove the Elite E2S/E2D back by lifting up and forward (3) on the back
support to release the lower mounting pins (C2).
Fig. 13
1
A
B
4.0 C
ARE AND
4.1 INSPECTION AND MAINTENANCE
WARNING! Risk of Injury or Damage
DO NOT continue to use this product if problems are discovered. Corrective
measures can be performed at, or arranged through your service provider.
Weekly: Inspect ALL fasteners weekly to ensure that mechanical connections
and attaching hardware are tightened securely.
Monthly: Perform a visual inspection of parts including hardware, brackets,
upholstery materials, foam, and plastics for deformation, corrosion, breakage,
wear or compression.
4.2 CLEANING/LAUNDERING:
WARNING! Risk of Injury or Damage
To avoid infectious exposure, inspect cushion thoroughly and properly clean and
disinfect any materials soiled with bodily fluids.
C1
2
3
C2
M
AINTENANCE
1
A
B
- 16 -
C1
Fig. 14
2
3
C2
Advertisement
Table of Contents
