Device Setup - Lenovo px2-300d User Manual

Device Setup

Device Setup runs automatically when you first access the px2-300d and steps you through configuring
basic device options. If you want to change these configuration settings later on, you can run setup again
by selecting the Device Setup icon under All Features in the px2-300d device management console.
You can also manually configure options for any feature on your px2-300d by selecting that feature's icon.
Other sections in this manual provide information on settings options for the features available on your px2-
300d.
If you run Device Setup after completing initial setup, it will not affect any content stored on your
px2-300d or change other configuration options you have set.
Some processes on your px2-300d also use the setup steps to confirm administrator authorization
and configure basic storage options, such as file system and RAID protection. This will not affect
other settings or data on your px2-300d.
Setting up Your px2-300d Network Storage
Device Setup 13