Device Setup - Lenovo EZ Media & Backup Center User Manual

Setting up Your EZ Media & Backup Center

Device Setup

Device Setup runs automatically when you first access the EZ Media and steps you through configuring
basic device options. If you want to change these configuration settings later on, you can run setup again
by selecting the Device Setup icon under All Features in the EZ Media device management console.
You can also manually configure options for any feature on your EZ Media by selecting that feature's icon.
Other sections in this manual provide information on settings options for the features available on your EZ
Media.
If you run Device Setup after completing initial setup, it will not affect any content stored on your
EZ Media or change other configuration options you have set.
Some processes on your EZ Media also use the setup steps to confirm administrator
authorization and configure basic storage options, such as file system and RAID protection. This
will not affect other settings or data on your EZ Media.
12 Device Setup