Adding And Managing Storage Pools; Adding A Data Storage Pool - Lenovo px2-300d User Manual

Adding and Managing Storage Pools

A Storage Pool is a grouping of drives with a certain storage size and an assigned data protection. A
Storage Pool has a minimum of one drive. By default, your px2-300d Network Storage has one Storage
Pool. If you add drives to your px2-300d, you can create additional Storage Pools. If your px2-300d
includes different capacity drives, you will need to create additional Storage Pools as all drives in a single
Storage Pool must be the same capacity.

Adding a Data Storage Pool

Adding a new Storage Pool requires available drives, that is drives that are not already incorporated into an
existing Storage Pool. If you want to use multiple Storage Pools and all drives are already included in an
existing Storage Pool, you will need to delete the existing Storage Pool before proceeding with the steps
below.
1. Open the Drive Management feature and click
2. In the Information section, enter a name for the Storage Pool.
3. To set the RAID protection, choose a value from the drop-down menu:
Mirror (RAID 1): Uses half of the storage space for protection, leaving half for actual data.
●
Protects data in the event of a single drive failure. Requires at least two drives.
None (RAID 0): Uses all of the storage space for data. Does not protect against data loss in
●
the event of drive failure; however, the drive are striped for better performance.
None: Uses all of the storage space for data, providing contiguous storage space by
●
concatenating all member drives. Does not protect against data loss in the event of drive
failure.
4. Select the checkbox of the drive or drives you want to add to the Storage Pool. All drives in a
Storage Pool must be the same size. If your px2-300d includes different capacity drives, you will
need to create a Storage Pool for each capacity grouping.
5. Check Enable periodic consistency check to enable a monthly parity or mirror consistency
check.
The check helps to prevent a single drive failure from becoming a two-drive failure, resulting in
data loss. The check runs for several hours and can affect performance of the px2-300d. If you do
not want to run the check, remove the check mark for this option.
6. If commonly used Shares, Backups, Documents, Movies, Music, Pictures, and SharedMedia do
not already exist on the px2-300d device, check Create commonly used Shares to create these
Shares and add them to the Storage Pool.
7. Click Create to add the new Storage Pool.
8. Click Cancel to discard any changes.
Add Storage Pool.
Adding and Managing Storage Pools
Storage Pool Management
77