1. Insert the bottom edge of the LCD panel at an angle of about 30 degrees.
2. Install the LCD panel. Ensure that all the latches are attached firmly.
2030 LCD hinges and LCD cable (for non-touch models)
Note: Before you start the servicing, disable the internal battery pack. See "Disabling the internal battery
pack" on page 60.
For access, remove these FRUs in order:
•
"1010 SIM card and SIM-card tray" on page 60
•
"1020 External battery pack" on page 60
•
"1040 Base cover assembly" on page 68
•
"1160 LCD unit" on page 85
• "2010 LCD-bezel sheet and LCD bezel assembly (for non-touch models)" on page 101
Removal steps of the LCD hinges
Step
Screw (quantity)
1
M2.5 × 2.5 mm, big-head, nylon-coated (4)
104
Hardware Maintenance Manual
1
1
1
1
Color
Silver
Torque
0.392 Nm
(4.0 kgf-cm)