Supply Life Messaging Information; Toner Cartridge Life Messaging - Lexmark MS71x Study Manual

Lexmark MS71x/MS81x & MX71x/MX81x Product Study Guide

Supply Life Messaging Information

Toner Cartridge Life Messaging

The following table provides the messaging that will appear on the control panel as supply life becomes
low. The Controller Board determines when the "Cartridge Low" message occurs; the IU determines
when the "Cartridge Very Low" occurs.
Saved Default
1 2
Warning Setting
Nearly Low Disabled
Low Enabled
Near End of
Enabled
Life
End of Life Enabled
1
The generic name of the warning used for Lexmark support documentation.
2
This column indicates whether or not the message is enabled by default.
3
This column indicates the default cartridge life remaining for each cartridges yield type. Once the
cartridge reaches this percentage, it will trigger the given warning. The user can change level that will
trigger the warning. The procedures to do this are documented in this guide in ye section called "How to
Change Supply Life Messaging Settings."
4
This column lists the default behavior options at each warning notification. The customer can customize
this feature. The default behavior is documented in
5
This indicates the actual message that will appear on the product control panel when the warning is
triggered.
For Training Purposes Only
Default
Toner Level
3
Rating
6K = 20%
10K = 20%
25K = 10%
45K = 10%
6K = 10%
10K = 10%
25K = 5%
45K = 5%
6K = 3%
10K = 2%
25K = 1%
45K = 1%
0%
4
Behavior Options
(Default in Blue)
Off
Warning
Email Alert
Continuable Stop
Non-Continuable Stop
Off
Warning
Email Alert
Continuable Stop
Non-Continuable Stop
Off
Warning
Email Alert
Continuable Stop
Non-Continuable Stop
Non-Continuable Stop
blue if no change is made.
70
Rev 1.3
5
Control Panel Message
"Cartridge nearly low"
"Cartridge low"
"Cartridge very low, 200
estimated pgs remain"
Pages remaining calculated on the
usage of the past 2000 pages
printed
"Replace cartridge, 0 estimated
pgs remain"
11/19/2012