Table of Contents
Advertisement
Prestige 100IH User's Guide
16. Action Not Matched - If the conditions for the filter rule are not met,
you can specify what to do with the packet. There are three options for
this field:
•
•
•
Once you have completed filling in 'Menu 21.1.1 - TCP/IP Filter Rule', press
ENTER at the message: 'Press ENTER to Confirm ...' to confirm your
selections, or press ESC at any time to cancel your selections. This data will
now be displayed on 'Menu 21.1 - Filter Rules Summary'.
Generic Filter Rule
This section will show you how to configure the protocol-independent
parameters for a Generic filter rule for your Prestige. For information on the
protocol-dependent fields, refer to the previous section, 'TCP/IP Filter Rule'.
The fields in the menu are indicated in bold type.
Figure 10-5 Menu 21.1.1 - Generic Filter Rule
1. Offset - Offset refers to the value of the byte that you want to use as your
starting offset. That is, in the data packet, at what point do you want to
begin the comparison. The range for this field is from 0 to 255. Default =
0
Filter Configuration
Check Next Rule.
Forward.
Drop.
ZyXEL
Page 77
Advertisement
Table of Contents
