Table of Contents
Advertisement
Check Next Rule .
Forward.
Drop.
Once you have completed filling in Menu 21.1.1 - TCP/IP Filter
Rule, press ENTER at the message: Press ENTER to Confirm ... to
confirm your selections, or press ESC at any time to cancel your
selections. This data will now be displayed on Menu 21.1 - Filter
Rules Summary.
Generic Filter Rule
This section will show you how to configure the protocol-
independent parameters for a Generic filter rule for your Prestige.
For information on the protocol-dependent fields, refer to the
previous section, TCP/IP Filter Rule and the following section,
Novell IPX Filter Rule. The fields in the menu are indicated in bold
type.
Figure 10-5 Menu 21.1.1 - Generic Filter Rule
1. Offset - Offset refers to the value of the byte that you want to
use as your starting offset. That is, in the data packet, at what
point do you want to begin the comparison. The range for this
field is from 0 to 255. Default = 0
Filter Configuration 101
Advertisement
Table of Contents
