Table of Contents
Advertisement
• Action Not Matched - Only packets that do not match the
rule parameters will be logged.
• Both - All packets will be logged.
15. Action Matched - If the conditions for the filter rule are met,
you can specify what to do with the packet. There are three
options for this field:
• Check Next Rule.
• Forward.
• Drop.
16. Action Not Matched - If the conditions for the filter rule are
not met, you can specify what to do with the packet. There are
three options for this field:
• Check Next Rule.
• Forward.
• Drop.
Once you have completed filling in 'Menu 21.1.1 - TCP/IP Filter
Rule', press ENTER at the message: 'Press ENTER to Confirm ...'
to confirm your selections, or press ESC at any time to cancel your
selections. This data will now be displayed on 'Menu 21.1 - Filter
Rules Summary'.
Generic Filter Rule
This section will show you how to configure the protocol-
independent parameters for a Generic filter rule for your Prestige.
For information on the protocol-dependent fields, refer to the
previous section, 'TCP/IP Filter Rule'. The fields in the menu are
indicated in bold type.
Filter Configuration 85
Advertisement
Table of Contents
