Table of Contents
Advertisement
Installation
^ Attach the panel to the dishwasher
by aligning the bracket tabs with the
slots on the door.
^ Open the dishwasher door slightly. If
the locking screws on the edge of the
dishwasher door can not be reached,
the dishwasher will have to be pulled
out of its opening a few inches.
14
^ Push up one side of the door panel
until it touches the spacer bars (or
control panel if spacer bars are not
being used) and lightly tighten the
T20 Torx screws on the
corresponding edge of the machine
door.
^ Repeat the process with the other
side of the door panel.
^ Shut the door.
^ Check that the door panel is adjusted
correctly. It should be snug at the top
and neatly aligned with the cabinet
drawer and door lines. If it is not
aligned properly, loosen the Torx
screws and readjust the panel
Once the door panel is positioned
correctly:
^ Open the dishwasher door.
^ Tighten all the Torx screws on the
edges of the dishwasher door.
^ Use the provided caps to plug the
locking screw access holes.
,
Front panels differ in weight and
it is therefore essential that the door
springs are adjusted after the front
panel has been fitted! See Step 6.
Hide quick links:
Advertisement
Table of Contents
