Table of Contents
Advertisement
Leveling legs
^ Adjust the rear leveling legs to the
required height with a T20 Torx
screwdriver.
To raise the machine - turn clockwise.
To lower the machine -turn counter
Several turns may be needed to set the
correct height. A low speed electric or
cordless screwdriver can also be used.
clockwise.
^ Adjust the front leveling legs by
pushing on the feet with a slotted
screwdriver.
The dishwasher should be raised
until it just touches the underside of
the countertop.
Installation
9
Hide quick links:
Advertisement
Table of Contents
