Altering The Brightness Of The Feature Lighting - Miele KWT 6831 SG Operating And Installation Instructions

^ Touch the OK sensor to confirm.
The selected lighting duration is saved
for all three zones. The temperature
appears again in the display.
The lighting duration set starts anew
whenever the appliance door is
opened.
Altering the brightness of the feature
lighting
The brightness of the interior lighting
can be adjusted.
^ Touch the sensor for the feature
lighting for approx. 4 seconds until i
flashes in the display (after 2
seconds ^ will flash).
^ Use the X and Y sensors for altering
the temperature to set the feature
lighting brightness.
The brightness will immediately start
to adjust gradually up or down.
By touching the sensor
– the lighting becomes dimmer
Feature lighting
– the lighting becomes brighter.
^ Touch the OK sensor to confirm.
The selected brightness is saved for all
three zones. The temperature appears
again in the display.
When the appliance door is closed, the
set brightness takes effect. When the
appliance door is opened, the interior
lighting returns to its normal level.
Do not remove the lighting covers.
Should the covers be damaged or
need to be removed due to damage,
exercise caution. There are lasers
in the lighting (laser beam class 1M)
which you should avoid looking at
directly. Do not use optical
instruments to look at the lighting!
31