Miele KWT 6831 SG Operating And Installation Instructions page 59

Moving the bearing block
^ Remove both covers m on the top of
the appliance front.
^ Unscrew bearing block n, turn it
around and fit it on the opposite side.
Changing the door hinging
^ Click covers m into place on both
sides from the front. Guide the cover
with the cut-out over the bearing
block.
^ Loosen adjustable foot o underneath
the appliance with the spanner
supplied.
^ Pull hinge pin p upwards and
unscrew it from adjustable foot o.
Hold the adjustable foot tightly whilst
doing this.
59