Feature Lighting; Turning The Feature Lighting On And Off; Setting The Brightness Of The Feature Lighting - Miele KWT6832SGS Operating And Installation Instructions

The interior lighting can be set to
remain on when the door is closed so
your wines can be on display at all
times.
Each zone has its own light so all three
zones are lit up.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
Turning the feature lighting on
and off
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
The interior lighting is now turned on in
all three zones, even when the door is
closed.
To turn the feature lighting off again:
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
The interior lighting is now turned off
when the door is closed.

Feature lighting

Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
^ Tap the sensor button for the feature
light again (about four seconds long),
until i flashes in the display (after two
seconds, ^ flashes).
^ Use the X and Y sensors for altering
the temperature to set the feature
lighting brightness. Hold the sensors
pressed in. The brightness will imme-
diately start to adjust gradually up or
down.
By tapping the button
– the lighting becomes dimmer
– the lighting becomes brighter
^ Tap the OK button to confirm your
choice.
29