Temperature And Door Alarm - Miele KWT 6831 SG Operating And Installation Instructions

Wine conditioning unit
Table of Contents

Advertisement

Temperature and door alarm

Your appliance is fitted with a warning
system which ensures that the
temperature in the three zones cannot
rise or fall unnoticed and impair the
wine.
Temperature alarm
If the temperature in one of the zones
gets too warm or too cold, the sensor
for the zone concerned and the alarm
symbol ; will flash at the same time in
the control panel. An audible alarm will
also sound.
The alarm will sound and the alarm off
indicator light will come on, for
example,
– when you switch the appliance on,
and for as long as the temperature in
a particular zone differs from the
temperature set.
– if the door has been left open for a
while in order to re-arrange or take
wine bottles out and warm air has
entered the appliance.
– if a large number of wine bottles are
put into the appliance at once.
– in the event of a power cut,
The alarm will stop and the Alarm
symbol ; will go out when the
temperature reaches the correct level
again. The sensor for the zone
concerned will light up again
constantly.
28
Switching the alarm off early
If the noise disturbs you, you can
switch the alarm off early if you wish.
^ Touch the sensor for switching off the
temperature alarm.
The alarm will stop.
The relevant zone and the alarm
symbol ; will continue to be lit up until
the temperature is at the correct level.
Safety devices in case of low
ambient temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the
external temperature should drop
below this level, a heater element in the
appliance switches on automatically to
keep the temperature inside as
constant as possible. If the ambient
temperature continues to fall, the
appliance switches itself off
automatically.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents