Feature Lighting; Turning The Feature Lighting On And Off; Setting The Brightness Of The Feature Lighting - Miele KWT6322 Operating And Installation Instructions

The interior lighting can be set to
remain on when the door is closed so
your wines can be on display at all
times.
Each zone has its own light so both
zones are lit up.
Thanks to the use of LED lighting, the
wine will not be adversely affected by
heat or UV light.
Turning the feature lighting on
and off.
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
The interior lighting is now turned on in
both zones, even when the door is
closed.
To turn the feature lighting off again:
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
The interior lighting is now turned off
when the door is closed.
Setting the brightness of the feature
lighting
The brightness of the feature lighting
can be adjusted.
^ Tap the On/Off sensor button for the
feature lighting so that it is
highlighted in yellow.
^ Tap the sensor button for the feature
light again (about four seconds long),
until i flashes in the display (after two
seconds, ^ flashes).
^ Use the X and Y sensor buttons for
altering the temperature to set the
feature lighting brightness. Hold the
sensor buttons pressed in. The
brightness will immediately start to
adjust gradually up or down.
By tapping the button
– the lighting becomes dimmer
– the lighting becomes brighter
^ Tap the OK button to confirm your
choice.

Feature lighting

27