Selecting The Descale Option In The Maintenance Menu - Miele CM 5100 Operating Instructions Manual

Descaling
Follow the instructions on the packet
carefully. It is important that you fill
the water container with enough
water. Too little water will cause the
descaling programme to be
cancelled prematurely.
^ Replace the water container in the
coffee machine.
Please follow the instructions which
appear in the display.
When FILL WATER CONTAINER AND
PLACE IN MACHINE appears,
^ remove the water container and rinse
it carefully with clean water. Make
sure that no descaling agent is left in
the water container. Fill the water
container with cold, clean tap water
up to the "Max." marker.
PROGRAMME FINISHED will appear in
the display to indicate that descaling
has been completed.
^ Press the OK button.
^ Clean the cappuccinatore to remove
any descaling agent.
^ Finally, empty the drip tray.
The descaling programme is finished
and the machine can be used for
making drinks again.
When descaling the machine, wipe
up any spillages or splashes of
descaling agent immediately. These
would damage the surface.
56
After descaling the machine carefully
rinse the water container and the drip
tray to remove all traces of descaling
agent.
Selecting the Descale option in
the MAINTENANCE menu
^ In the main menu, press the OK
button for two seconds.
SETTINGS
r MAINTENANCE
^ Turn the rotary control until
MAINTENANCE appears in the
display.
Press the OK button.
^ Turn the rotary control until DESCALE
appears in the display.
Press the OK button.
^ Turn the rotary control until START
appears in the display.
This descaling programme cannot
be cancelled once it has started.
The programme has to be
completed through to the end.
^ Press the OK button.
s