Water Container; Drip Tray Cover - Miele CM 5100 Operating Instructions Manual

^ Clean all parts with a solution of hot
water and washing-up liquid. If
neccessary, a small brush can be
used to remove any stubborn milk
deposits.
^ Rinse all parts carefully under
running water.
^ Then dry them carefully.
Reassemble the cappuccinatore in the
reverse order:
^ First replace the locking disc
followed by the dial on the
cappuccinatore.
^ Then replace the milk tube and
nozzles.
^ Fit the cappuccinatore on to the
steam and water spout from below.

Water container

Change the water every day to prevent
a build-up of bacteria.
Make sure that the valve, the
underside of the water container and
the surface the water container sits
on are clean. Otherwise the water
container will not sit correctly.
^ The water container can be cleaned
in the dishwasher or by hand using
hot water and a little washing-up
liquid.
^ After cleaning, dry the water
container.
^ Clean the surface the water container
sits on, particularly the slots,
carefully.
Cleaning and care

Drip tray cover

^ Remove the drip tray cover from the
drip tray.
^ The drip tray cover can be cleaned in
the dishwasher or by hand using hot
water and a little washing-up liquid.
^ Dry the drip tray thoroughly.
^ Replace the cover onto the drip tray.
Make sure that the outer hole is
located underneath the
cappuccinatore.
49