To change the small jets
To change the small jets, the burner
securing screws must first be loosened
and the upper section of the appliance
removed.
^ Pull the control knobs off.
^ Remove the burner parts.
^ Loosen the screws.
^ Lift the top of the appliance off.
Small, medium and large burners
^ Using a small screwdriver, unscrew
small jet a in the gas fitting.
^ Pull out the jet with a pair of pliers.
^ Fit the correct jets securely (see jet
table).
^ Finally, secure the jets against
inadvertent loosening with sealing
wax.
Conversion to another type of gas
Wok burner
a Small jets with smaller diameter (e.g.
for liquid gas: 0.23)
b Small jets with larger diameter (e.g.
for liquid gas: 0.52)
^ Using a small screwdriver, unscrew
the two small jets a and b in the gas
fitting.
^ Pull out the jets with a pair of pliers.
^ Fit the correct jets securely (see jet
table).
^ Finally, secure the jets against
inadvertent loosening with sealing
wax.
53