Cleaning And Care - Miele KM 2356 Operating And Installation Instructions

Gas hobs
Table of Contents

Advertisement

Cleaning and care

To avoid damaging the surface of your appliance, do not use:
26
,
Do not use a steam cleaning appliance to clean this
appliance. The steam could reach electrical components
and cause a short circuit.
– The appliance should be cleaned after each use. Allow the
appliance to cool down to a safe temperature before
cleaning.
– To avoid water marks and limescale deposits, use a soft
cloth to dry surfaces that have been cleaned with water.
– Stubborn soiling should be soaked first.
– Remove any soiling immediately. Food which boils over
onto the hot hob can cause the burner components and
the stainless steel surface of the hob to discolour.
– The surfaces of the burner components will become more
matt with time. This is quite normal and will not affect the
operation of the hob.
– cleaning agents containing soda, alkalines, ammonia,
acids or chlorides,
– cleaning agents containing descaling agents,
– stain or rust removers,
– abrasive cleaning agents, e.g. powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges, e.g. pot scourers, or
sponges which have been previously used with abrasive
cleaning agents,
– sharp pointed objects
(these can damage the seal between the frame and the
worktop)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 2354Km 2355

Table of Contents