Table of Contents
Advertisement
KM 2357
Flush fit gas hobs are only suitable
for installation in granite, marble,
tiled or solid wood worktops. When
using a worktop made from any
other material, please check first
with the worktop manufacturer that it
is suitable for installing a flush fit
hob.
This appliance requires a 900 mm
wide base unit for installation.
The hob must be accessible from
below for servicing purposes and to
ensure that the seal around it is not
dislodged.
The hob may be fitted
– in a suitable cut-out in a granite or
marble worktop.
– in a suitable cut-out in a tiled or solid
wood worktop with a wooden support
frame. The frame must be provided
on site, and is not supplied with the
appliance.
40
Advertisement
Table of Contents
