Table of Contents
Advertisement
Problem
If there is a power cut
during operation
The gas flame goes out
after ignition
The flame pattern has
changed
The flame goes out
during operation
The ignitor on the burner
does not spark.
Possible cause
The flames are not
touching the ignition safety
device, it is not hot
enough:
- The burner is not
correctly assembled.
- There is dirt on the
ignition safety device.
The burner is not correctly
assembled.
The burner head or burner
cap holes are dirty.
The burner is not correctly
assembled.
Check whether the mains
fuse has tripped.
- Food residues between
the ignitor and the burner
cap.
- Food residues on the
ignition safety device
Power cut.
Problem solving guide
Remedy
Turn all the controls clockwise to the "ß"
position. You can then operate the appliance
as normal when power is restored.
Assemble the burner correctly.
Remove any soiling.
Assemble the burner correctly.
Remove any soiling.
Assemble the burner correctly.
If it has, contact a qualified electrician or
Miele Service.
Remove any soiling. Please see "Cleaning
and care" for details.
Turn all the controls clockwise to the "ß"
position. You can then operate the appliance
as normal when power is restored.
31
Advertisement
Table of Contents
