Table of Contents
Advertisement
INSTALLATION GUIDE
CHAPTER 5. Electromechanical Setup Procedure
Note: Parts of this chapter may have already been completed during printer prep.
5.1
Mounting the Paper Stopper (Stacker)
1.
Remove the front of the Paper Stopper Guide Rail Screw shown in Figure 5-1.
2.
Install the Paper Stopper in the Paper
Stopper Guide Rail as shown in Figure
5-2 and re-install the screw.
15
Paper Stopper Guide Rail
Figure 5-1
Guide Rail Screw
Figure 5-2
Advertisement
Table of Contents
