Tascam DR-60DmkII Reference Manual page 37

NOTE
•
Select to mute the mic input.
MUTE
•
has only two mic input gain options—
Ch3/4
and .
HIGH HIGH+PLUS
•
The , and settings change the input gain, and
LOW MID HIGH
should be set according to the input level.
If you are not sure which setting to use, try
level is too low even after adjustment, return to the
screen and set it to
SETTING
after switching to , switch it to
MID
too low after switching to
HIGH
•
The limiter function can be set and changed even during
recording standby and when recording.
When finished making the setting, press the stop (8) [HOME]
5.
button to return to the Home Screen.
Press the record (0) button to begin recording standby. The
6.
record indicator flashes red and the recording screen appears.
NOTE
will appear on the Home Screen above the level meters of
MUTE
channels that are muted.
(default value),
LOW
first. If the input
LOW
INPUT
. If the input level is still too low
MID
. If the input level is still
HIGH
, switch it to .
HI +PLUS
7. Use the 1/L, 2/R and 3-4 knobs on the front of the unit to adjust
the input levels.
If the input levels are too high, the peak indicators to the left of
the 1/L, 2/R and 3-4 knobs light red.
A b mark is provided at –12 dB on the level meters. Set the
input level so that the indicator bars move to and fro with this
mark at about the center without causing the 1/L knob, 2/R
knob, 3-4 knob PEAK indicator to light red when the loudest
sounds occur.
CAUTION
During mic input, this lights if distortion occurs in the analog
circuitry. During line level input, this does not light even if
distortion occurs in the analog circuitry.
NOTE
To monitor the sound while adjusting the input levels or
recording, connect headphones to the PHONES jack.
Use the PHONES jack volume control to adjust the monitoring
level. Changing the monitoring volume does not affect the
recorded sound.
8. When finished making the setting, press the stop (8) [HOME]
button to exit recording standby.
4 – Recording
37
TASCAM DR-60DMKII