13 - Troubleshooting - Tascam DR-60DmkII Reference Manual

13 – Troubleshooting
If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the
problem, please contact the store where you bought the unit, an authorized distributor or a TASCAM Customer Support (see the back cover
for details).
8 Power will not turn ON.
•
Confirm that the batteries are not dead.
•
Confirm that the batteries are installed with the correct ¥/^
orientation.
•
Confirm that the TASCAM PS-P515U AC adaptor (sold separately)
is firmly connected to both the socket and the unit.
•
Confirm that the USB cable (if used for USB bus power supply) is
firmly connected.
•
Confirm that the USB cable (if used for USB bus power supply) is
not connected via a USB hub.
•
Confirm that the HOLD switch is not set in the direction of the
arrow.
8 The unit turns off automatically
•
Is the automatic power saving function enabled? (See "Setting
the automatic power saving function" on page 76.)
•
This product is compliant with the European ErP standby power
regulations. For this reason, the automatic power saving function
will operate whether it is running on batteries or using the AC
adaptor. Set the automatic power saving function setting to
OFF if you want to disable it. (The factory default setting is 30
minutes.)
84
TASCAM DR-60DMKII
8 The unit does not function.
•
Confirm that the HOLD switch is not set in the direction of the
arrow.
•
Is the unit connected to a PC with the USB cable? (Is USB
connected shown on the display?)
8 The SD card is not recognized.
•
Confirm that the SD card is inserted completely.
8 Playback does not work.
•
Confirm that the sampling frequency of the WAV file is supported
by this unit.
8 No sound is output.
•
Is the monitoring system connected correctly?
•
Is the volume of the monitoring system minimized?
•
Is the OUTPUT LEVEL setting of the unit minimized?
8 Recording does not work.
•
If you are using an external device, check the connection again.
•
Check the input settings again.
•
Confirm that the input level is not too low.
•
Confirm that the SD card is not full.
•
Confirm that the number of files has not reached the maximum
that the unit can handle.