12 - Messages - Tascam DR-60DmkII Reference Manual

The following is a list of the popup messages that might appear on the DR-60DMKII under certain conditions. Refer to this list if one of these
popup messages appears and you want to check the meaning or determine a proper response.
Message Meaning and response
The DIVIDE function would cause the file name to exceed 200 characters. The DIVIDE function adds "a" or "b" to the
File Name ERR end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and edit the file
name to less than 198 characters.
The DIVIDE function would cause the file name to be the same as that of an existing file. The DIVIDE function adds "a"
Dup File Name or "b" to the end of the original file name. Before choosing the DIVIDE function, connect the unit to a computer and
edit the file name.
File Not Found The file either cannot be found or could be damaged. Check the file using a computer.
The audio file is not a supported format. Please see "9 – Connecting with a computer" for file formats that this unit
Non-Supported
can use.
Battery Empty The battery is almost out of power. Replace the AA batteries.
The SD card is not formatted properly or the formatting is broken. Change the SD card or press the DATA dial when
this message appears to format the SD card in FAT format.
MBR Error Init CARD
CAUTION: Execution of FAT formatting erases all data currently on the SD card.
The FAT formatting of the SD card is abnormal or broken. This message also appears if you FAT formatted the SD
card using a computer connected by USB and if a new SD card is inserted in the unit. Always use the DR-60DMKII to
Format Error
conduct FAT formatting of SD card to be used with it. Change the SD card or press the DATA dial when this message
Format CARD
appears to format the SD card in FAT format.
CAUTION: Execution of FAT formatting erases all data currently on the SD card.
File Not Found The system file is missing. This unit requires a system file for operation. When this message appears, press the DATA
dial to automatically create a system file.
Make Sys File
Invalid SysFile
The system file required to operate this unit is invalid. When this message appears, press the DATA dial to automati-
cally create a system file.
Make Sys File
Invalid Card
Something might be wrong with the SD card. Change the SD card.
Change Card
12 – Messages
81
TASCAM DR-60DMKII