Panel Controls - Galileo Milano 3G Owner's Manual

Hide thumbs Also See for Milano 3G:
Table of Contents

Advertisement

Panel Controls

The elegant control panel is divided into several distinct sections. The folowing is a brief descrip-
tion of all the features located on the control panel.
1
2
Hamony number
Hamony
icon
Engagement Bar
POWER SWITCH - The power switch is located to the left of the keyboard.
Press the button to turn the power on and off. There is an indicator light on
the left front portion of the piano. This light will be lit when power is on.
Note: When you turn the power off, do not turn it back on immediately.
Wait at least five seconds to turn the power back on so that the electronic
circuits can properly reset.
3
1. MASTER VOLUME - Use this sliding controller to adjust the overall
volume of the keyboard.
Note: At higher volumes there may be audio clipping or distortion
depending on the frequencies being played
2. ACCOMP VOLUME - Slide this controller to adjust the volume of the
auto accompaniment, metronome and SD Card playing, the keyboard
instrument voice will not be affected.
3. TEMPO - Press one of the TEMPO buttons, the current tempo value will
appear on the display. You can use the TEMPO +, TEMPO – buttons, or
the DARA WHEEL to change the tempo range from 40 to 240 bpm (beats
per minute). Press the TEMPO + or TEMPO – buttons simultaneously to
recall the default tempo setting for the selected rhythm style. After
three seconds the display will revert to the selected voice.
There is a four-dot beat indicator above the tempo buttons. It indicates
the tempo and beat for the accompaniment that is playing.
S ee the Auto Accompaniment section of this manual for more information.
4. HARMONY - When selected, the single note played in the right-hand
section of the keyboard will sound with additional auto harmony notes.
The note played in the upper section of the piano determines the root
key of the harmony. It is recommended that one note be played at a
time. When the harmony is engaged, the engagement bar will appear
underneath the Harmony icon on the LCD Display and the harmony
number will be shown above the icon.
Auto harmony is only available when the auto accompaniment is
engaged. The harmony type selection is assigned in the Setup menu.
See the Auto Accompaniment section of this manual for more information.
4

Advertisement

Table of Contents
loading

Table of Contents