Registration Memory - Galileo Milano 3G Owner's Manual

Registration Memory

Registration Memory can recall particular settings of style, voice and other parameters or features
you have engaged. This piano has ten registration memories to hold your favorite settings so that
they can be recalled quickly by pressing a button.
Your registration memories will not be lost when the power is turned off.
Save Your Settings In The Registration Memory
1. Set the voice, rhythm, tempo, accompaniment, reverb effect and any
other parameters that you wish to save.
2. Press and hold down the USER REG button for 3 seconds. The current
registration memory number is blinking.
Re g i s t
3. Use the DATA WHEEL or +, - buttons to select the registration memory 1 -
10 you desire to save the settings. Press the ENTER button to confirm.
Your setting will be saved into that registration memory instantly. The
operation mode reverts to the voice selection and the engagement bar
underneath the Registration icon disappears.
Recall Contents In The Registration Memory
1. Press and release the USER REG button to engage the registration
memory mode, the engagement bar underneath the Registration Icon
will appear. The current registration memory number will show above
the icon. You can see the parameters such as voice, style, tempo etc
updating on the display.
Main voice setting in this Registration memory
St r i n g s 1
2. Use the DATA WHEEL or +, - buttons to select the registration memory
you desire to save the settings. Press the ENTER button to confirm. The
relevant parameters will be set.
Note: There is a special registration memory numbered 0. When you
call this Registration memory, it will recall all the factory default setting.
You can not save your setting into this memory.
3. Press the USER REG button again, or make any individual change such
as voice, style etc when a Registration memory is engaged, the Regis-
tration mode will exit. The activity mark underneath the Registration
icon will disappear.
Pi c k Ba s s
Note: whenever the engagement bar underneath the Registration Icon
is on, the DATA WHEEL and +, - buttons are used to select the Registra-
tion Memory instead of setting individual parameters.
Regist number
Registration.icon
Engagement Bar
Regist number
Regist. icon
Engagement Bar